|
| |
|
|
|
KM-2560 |
|
|
General |
| General type |
A3 Multifunctional |
| Technology |
Kyocera Laser, Mono Component |
| Engine speed |
Max. 25/12 pages per minute A4/A3 |
| Resolution |
600 x 600 dpi (copy), 1,800 dpi level x 600 dpi (copy, photo mode), 1200 dpi quality (print) |
| Warm-up time |
29 seconds or less from power on |
| Time to first copy |
4.7 seconds or less |
| Dimensions (W x D x H) |
570 x 620 x 762,2 mm |
| Weight |
Main unit: Approx. 75 kg |
| Power consumption |
Printing: 560 W, Stand-by: 160 W, Power-Saving (ECOpower): 8.7 W |
| Power source |
AC 220 V ~ 240 V, 50/60 Hz |
| Noise (ISO 7779) |
Printing/copying: 64.7 dB(A), Stand-by:
47 dB(A), Power-Saving (ECOpower): Immeasurably low |
| Certifications |
TÜV/GS, CE, ISO 9001, ISO 14001 |
|
 |
Paper Handling |
| Input capacity |
2
x 500-sheet universal paper feeder,60-120 g/m², A3-A5R, Folio 200-sheet
multi-purpose tray, 45-200 g/m², A3-A6R, Folio, envelopes
Max. input capacity with options: 2,200 sheets Duplex as standard
supports A3-A5, 60-80 g/m² |
| Output capacity |
250 sheets face-down |
| Further information |
All
paper capacities quoted are based on a paper thickness of max. 0.11 mm.
Please use paper recommended by Kyocera under normal environmental
conditions. |
|
|
Print |
| Processor |
PowerPC 750CXr / 400MHz |
| Memory |
Standard 512 MB (max. 1 GB) + 80 GB HDD
(system shared) |
| Controller language |
PRESCRIBE IIe |
| Emulations |
PCL 6, KPDL3 (Postscript 3 compatible), Line Printer, IBM Proprinter X24, EPSON LQ-850, DIABLO 630, HP-GL7550A - KC GL |
| Fonts |
80 outline fonts (PCL6), 136 PostScript KPDL 3 fonts,
1 bitmap font, 45 types of one-dimensional barcodes plus
two-dimensional barcode (PDF-417) |
| Downloadable fonts |
Downloadable fonts: Kyocera, PCL + TrueType format, Type 1 + 3 format |
| Print features |
EMPS - for quick copy, Proof and hold, Private print, Job storage, Job management functionality |
|
|
Copy |
| Max. original size |
A3 |
| Copy features |
Scan
once print many, Electronic sort, Rotate sort, Rotate copy, n-up copy,
Split copy, Cover mode, Page numbering, Margin shift, Border erase, Box
image overlay, Interrupt output job |
| Exposure modes |
Auto, manual: 7 or 13 steps |
| Preset magnification ratios |
5R/ 5E |
| Zoom range |
25 - 400 in 1% steps (with DP-670: 25-200%) |
| Continuous copy |
1 - 999 |
| Memory capacity |
512 MB (max. 1 GB) + 80 GB HDD |
|
|
Scan |
| Bundled scan-software |
KM-NET Viewer, TWAIN source |
| Interfaces |
10Base-T/100Base-TX |
| Compression format |
B/W: G4 (MMR)
Colour: JPG |
| Original recognition |
Text, Photo, Text - Photo, OCR |
| Max. scan size |
A3 |
| Scan functionalities |
Scan-to-SMB FTP, Scan-to-email, Scan-to-BOX, BOX TWAIN, Network TWAIN |
| Scan resolution |
600,
400, 300, 200, 200x100, 200x400, 256 grayscales, 256 colour: Colour
scanning at resolutions of 400 dpi and above requires additional memory. |
| Scan speed |
50 originals per minute in b/w (300 dpi/A4), 15 originals per minute in colour (300 dpi/A4) |
|
|
Fax |
| Compatibility |
ITU-T Super G3 |
| Modem speed |
33.6 kbps |
| Transmission speed |
3 or less |
| Scanning density |
Fine: 8 dot/mm x 7.7 line/mm, Normal: 8 dot/mm x 3.85 line/mm, Superfine : 8 dot/mm x 15.4
line/mm, Ultra fine: 16 dot/mm x 15.4 line/mm, SUFine: 600 x 600 dpi |
| Max. original size |
A3 |
| Compression method |
MH, MMR, MR, JBIG |
| Memory |
Standard 120 MB (enable fax image back up BU-10) |
| Fax features |
Internet fax, Network fax, Rotate transmission, Confidential, Relay and bulletin board transmission and reception |
|
|
Interfaces |
| Standard interface |
USB 2.0 (Hi-Speed), USB Host Interface dedicated for USB Flash Memory device, Fast Ethernet 10-Base-T/ 100Base-TX, CF slot |
| Multiple interface connection (MIC) |
Allows simultaneous data transfer via up to four interfaces, with each interface having its own virtual printer. |
|
|
|
|
|
|
